Petrochemistry
In the field, it has been shown that only highly alloyed high performance steels employing a special fabrication process for seamless tube systems are able to withstand such severe process demands: these materials are tubes made by centri-casting. For over 50 years S+C has accelerated this development and has achieved its status as a market leader through innovations in its Centralloy® special alloy product line and through continuous developments in centri-casting technology.Extreme 3-D-Bent centrifugal casting as fittings in steam crackers
Bending of centrispun tubes was limited to rather wide radius and was used for special to rather wide radius and was used for special radiant coil designs only. Elbows and return bends were still produced as static casting, i.e. heavy, rough internal surface, brittle because of the large grains, and a number of additional welds in particular with complex 3-dimensional coil designs.
This has come to an end: From today on, you can enjoy the advantages of centrispun tubes also in elbows and return bends - with our new SuperBent products!
This has come to an end: From today on, you can enjoy the advantages of centrispun tubes also in elbows and return bends - with our new SuperBent products!
SC Super Bent - what´s new?
In addition to that: The length between 2 bends can be as small as 600 mm - which allows complex 3-dimensional bends to be done from one single tube without having any weld.
SC Super Bent - your advantages and benefits
Your advantages and benefits are manifold:
You save money and trouble - by reduced material costs, reduced maintenance problems and improved performance. Contact us and ask for our quote!
- Less welds - this means reduction in potential structural weaknesses
- Less weight - this means higher flexibility in production and shorter leadtime
- Smoother internal surface and thus less cooking - centrisupn tubes are internally machined to a Ra of 3.2 μm vs. > 10 μm of static castings
- Better heat transfer - through lower wall thickness than in statically cast components
- Higher flexibility in coil design and construction - the extended length of centrispun tubes allows the positioning of the welds where it is most convenient for the furnace construction and for maintenance
- Easier maintenance and repair - by the well-known superior material properties of centrifugal vs. static casting, welding and repair of aged material is much easier
- Longer lifetime and less maintenance - the bending radius is smoother than in a static cast fitting which causes less erosion; the wall thickness is lower, more homogeneous, and has the superior centrifugal casting structure, thus minimizing tensions and thermal fatigue cracking
- And: SuperBent tubes are available in all of our well known materials
You save money and trouble - by reduced material costs, reduced maintenance problems and improved performance. Contact us and ask for our quote!
Schmidt + Clemens (Asia) Sdn. Bhd.
(Company No. 514800-V)
No. 15, Jalan Pemaju U1/15, Section U1
Hicom Glenmarie Industrial Park
40150 Shah Alam, Selangor Darul Ehsan, Malaysia
eMail: sc-asia(at)schmidt-clemens.com
No. 15, Jalan Pemaju U1/15, Section U1
Hicom Glenmarie Industrial Park
40150 Shah Alam, Selangor Darul Ehsan, Malaysia
| Phone: | +6 03-5569 1945 |
| Phone: | +6 03-5522 7676 |
| Fax: | +6 03-5569 1425 |
eMail: sc-asia(at)schmidt-clemens.com
